? semiconductor components industries, llc, 2007 october, 2007 - rev. 0 1 publication order number: nlas5113/d nlas5113 1 r on spst switch the nlas5113 is an spst switch designed for very low r on applications within portable devices. the nlas5113 operates over a wide v cc range, 1.65 v to 4.5 v, and maintain a very low r on : 1.3 max @ v cc = 4.2 v. it is available in a choice of two packages: sc88 and udfn6. features ? r on : 1.3 max @ v cc = 4.2 v ? v cc range: 1.65 v to 4.5 v ? udfn6 or sc88 packages available ? these are pb-free devices typical applications ? mobile phones ? portable devices marking diagrams udfn6 case 517aa xx = device code m = date code = pb-free package http://onsemi.com sc-88 case 419b application diagram nlas5113 ap m 1 6 1 2 m 1 (note: microdot may be in either location) device package shipping ? ordering information NLAS5113MUTBG udfn6 (pb-free) 3000/tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d. nlas5113dft2g sc-88 (pb-free) 3000/tape & reel
nlas5113 http://onsemi.com 2 1 2 34 6 5 vcc no n.c. com in gnd figure 1. functional block diagram pinouts 1 2 3 4 6 5 com n.c. gnd vcc no in udfn6 sc88 pin # name direction description 1 v cc input analog supply voltage 2 no i/o normally open signal line 3 in input control input for switch # 4 gnd input ground 5 n.c. n/a no connect 6 com i/o common signal line function table in no 0 1 off on
nlas5113 http://onsemi.com 3 operating conditions maximum ratings symbol pins parameter value condition unit v cc v cc positive dc supply voltage -0.5 to 5.5 v v is nox, ncx, comx analog signal voltage -0.5 to v cc + 0.5 v v in in1, in2 control input voltage -0.5 to 6.0 v i cc v cc positive dc supply current 50 ma i is_con nox, ncx, comx analog signal continuous current 300 closed switch ma i is_pk nox, ncx, comx analog signal peak current 500 10% duty cycle ma i in in control input current ma t stg storage temperature range -65 to 150 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. recommended operating conditions symbol pins parameter value condition unit v cc v cc positive dc supply voltage 1.65 to 4.5 v v is nox, ncx, comx analog signal voltage 0 to v cc v v in in1, in2 control input voltage 0 to v cc v t a operating temperature range -40 to 85 c note: minimum and maximum values are guaranteed through test or design across the recommended operating conditions , where applicable. typical values are listed for guidance only and are based on the particular conditions listed for each section, whe re applicable. these conditions are valid for all values found in the characteristics tables unless otherwise specified in the tes t conditions.
nlas5113 http://onsemi.com 4 dc electrical characteristics typical: t = 25 c; v cc = 3.3 v, r l = 50 symbol pins parameter test conditions min typ max unit voltage i out < 20 a v ih inx control input high 2.7 v < v cc 2.0 v v il inx control input low 0.8 v current i in inx control input leakage 0 v < v in < v cc 0.1 1.0 a i no/nc (off) ncx, nox off state leakage 0 v < v com , v no < v cc 0.1 1.0 a i com (on) comx on state leakage 0 v < v com , v no < v cc 0.5 2.0 a i cc v cc quiescent supply all channels on or off; v in = v cc or gnd, i out = 0; 1.0 2.0 a on resistance i on = -100 ma, v is = 0 to v cc symbol pins parameter test conditions v cc (v) min typ max unit r on on resistance 2.7 4.2 1.7 1.1 2.0 1.3 r flat r on flatness 2.7 4.2 0.4 0.4 esd protection pins description minimum voltage all pins to ground human body model 3 kv ac electrical characteristics typical: t = 25 c; v cc = 3.3 v, r l = 50 , c l = 5 pf, f = 1 mhz symbol parameter test conditions min typ max unit frequency bw -3db bandwidth 457 mhz thd total harmonic distortion f = 20 hz to 20 khz, 1.0 v pp 0.08 % transition times t on turn on time: com to no 7.0 ns t off turn off time: com to no 4.5 ns off isolation v no or v nc (pk-pk) = 1.0 v o irr off isolation -57 db capacitance symbol pins parameter test conditions min typ max unit c in inx control input v cc = 0 v 2.8 pf c on no to com through switch v cc = v in = 3.3 v 20 pf c off no1, no individual port v cc = 3.3 v, v in = 0 v 14 pf
nlas5113 http://onsemi.com 5 package dimensions udfn6, 1.2x1.0, 0.4p case 517aa-01 issue b notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimension b applies to plated terminal and is measured between 0.25 and 0.30 mm from terminal. 4. coplanarity applies to the exposed pad as well as the terminals. a b e d bottom view b e 6x 0.10 b 0.05 a c c l 5x note 3 2x 0.10 c pin one reference top view 2x 0.10 c 10x a a1 (a3) 0.08 c 0.10 c c seating plane side view l2 1 3 4 6 dim min max millimeters a 0.45 0.55 a1 0.00 0.05 a3 0.127 ref b 0.15 0.25 d 1.20 bsc e 1.00 bsc e 0.40 bsc l 0.30 0.40 l2 0.40 0.50 mounting footprint* dimensions: millimeters 0.22 6x 0.42 6x 1.07 0.40 pitch *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d.
nlas5113 http://onsemi.com 6 package dimensions notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 419b-01 obsolete, new standard 419b-02. e 0.2 (0.008) mm 123 d e a1 a a3 c l 654 -e- b 6 pl sc-88/sc70-6/sot-363 case 419b-02 issue w dim min nom max millimeters a 0.80 0.95 1.10 a1 0.00 0.05 0.10 a3 b 0.10 0.21 0.30 c 0.10 0.14 0.25 d 1.80 2.00 2.20 0.031 0.037 0.043 0.000 0.002 0.004 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 min nom max inches 0.20 ref 0.008 ref h e h e e 1.15 1.25 1.35 e 0.65 bsc l 0.10 0.20 0.30 2.00 2.10 2.20 0.045 0.049 0.053 0.026 bsc 0.004 0.008 0.012 0.078 0.082 0.086 mm inches scale 20:1 0.65 0.025 0.65 0.025 0.50 0.0197 0.40 0.0157 1.9 0.0748 *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* sc-88/sc70-6/sot-363 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. typical parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. nlas5113/d publication ordering information n. american technical support : 800-282-9855 toll free ?usa/canada europe, middle east and africa technical support: ?phone: 421 33 790 2910 japan customer focus center ?phone: 81-3-5773-3850 literature fulfillment : ?literature distribution center for on semiconductor ?p.o. box 5163, denver, colorado 80217 usa ? phone : 303-675-2175 or 800-344-3860 toll free usa/canada ? fax : 303-675-2176 or 800-344-3867 toll free usa/canada ? email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
